Thursday, March 25, 2021

Uncle Jack to the Rescue - March 25, 2021

 

We plan to take a little trip next week, and it occurred to me today that the little tomato seedlings that sprouted this week will probably die while I'm gone unless I can find someone to take care of them for me.

A few minutes after I began to worry about the tomato seedlings, Uncle Jack's granddaughter came into the office where I was working, and it hit me: Uncle Jack has a greenhouse.  His granddaughter (who also calls him "Uncle Jack") said he would be delighted to babysit my plants.

So this afternoon I called his house.  Aunt Myra said he was napping, but she was certain that he would love to be a foster parent to my tomatoes.  I'm going to take them to him tomorrow.  

Uncle Jack is the best.  :)


Tuesday, March 23, 2021

Tomatoes Sprouted - March 23, 2021

 

The tomato seeds I planted last week are sprouting.  I'm worried that they're going to get leggy, even though I have two "full-spectrum" lights on them.  They'll go out to the porch the minute I think they can take it.


Sunday, March 21, 2021

Hyacinth Bean Vine Sprouts - March 21, 2021

 

Looky here; the hyacinth bean vine seeds are sprouting.


This just happened TODAY.  There were no sprouted seeds in that tray yesterday afternoon.  The one in the lower left corner is even trying to crank out its first real leaves.  

I planted the seeds 10 days ago, after soaking them for 24 hours.  Covered the "tray" with press-n-seal to preserve moisture, and I think that I have not watered them since the planting.  They've been on the back porch the whole time.  I should probably move them to the front porch, where they'll get more light.  Daytime temperatures have been in the 60ish range, mid thirties at night.  

My friend who gave me the seeds said that I could've probably poked them right in the ground.  As wet as my ground is right now, that's probably true. 

I planted about 20 seeds in that box.  Who wants some plants (if I don't kill them)?


Sticks - March 21, 2021

 

Yesterday was the official first day of spring.  I can't think of a year when I've been happier to mark the day.

I was outside early, pruning rose bushes and checking to see what was budding or blooming.

After lunch, The Husband said it would be a good day to trim Nanny's crape myrtles.  She wanted it done last year, but we never got around to it.  This year, she has already mentioned it several times.  The bushes - effectively TREES - are growing near both ends of her front porch.  They were far taller than the roof, and the limbs were bigger around than my arms.  We hitched the wagon to the 4-wheeler, loaded up the chainsaw, and headed down Nanny's driveway.

We almost killed Nanny several times before we got the job done.  She insisted on helping, even though we begged her to just supervise from the porch.  As The Husband lopped off the limbs, I grabbed them and swung them around so that he could cut them into manageable chunks.  Nanny would stand too close as I was swinging the limbs around, and I almost whacked her several times.  

We piled the big chunks in the wagon and threw the tops in a heap in the front yard, intending to pile them on another heap of limbs in the pasture in front of her house, where my son had piled some brush he had cut along her driveway last fall.   Crape myrtle wood is very cool.  The limbs are straight and smooth, and the wood is hard.  As we filled up the first wagon-load of wood and prepared to dump it somewhere, I kept thinking what a shame it was to waste that beautiful wood.  Then it occurred to me that Cousin Roger might want it for his new wood-working projects.  Those limbs would make great legs for rustic stools, assuming Roger could figure out how to dry it without it splitting.  

The Husband hauled the wood over to Roger's house (I saved a long, straight piece for myself), and Roger said he'd give it a try, so they unloaded it, and The Husband came back to start on the second tree.

By this time, Nanny had experienced a few dizzy spells from all the bending and raising up, and we asked her to please, please sit this one out.  She sat down on the porch steps to "supervise" while we trimmed the second tree.  At one point, one of the limbs fell toward the porch and missed her by about an inch. 

After The Husband drove the second load of wood over to Roger's, we had to figure out how to move the crape myrtle tops away from the front yard.  It took us a minute.  We laid out a tow-strap on the ground in front of the first pile, and The Husband used the bucket on his new tractor to push the brush onto the strap.  We bundled the brush with the strap, and he dragged it to the pasture and came back for the second pile.  Made quick work of that job.  It took a little longer to rake up all the stray sticks and haul them away.

When we finished, I commented that I was hungry, and Nanny invited us to a supper of left-over spaghetti.  I was glad for the invitation, for the thought of going home to cook was not all that appealing.  We'd probably have had toast if it had been left up to me.

It was pushing 8 o'clock by the time we came home.  I took a shower, popped a couple of Tylenol, and went to bed.



Saturday, March 20, 2021

Equipped! - March 20, 2021

 

I spoke a little too soon about having no side effects from the covid vaccination.  Got the shot Wednesday night, felt fine most of the day Thursday, but Thursday evening, my tailfeathers began to droop.  I felt a little headache-y, a little tired, and a little nauseous.  The Husband was feeling the same way.  Before bed, I popped two Tylenol and slept for 10 hours straight.  Yesterday for about half of the day I had a sharp, come-and-go headache, but it went away mid-afternoon and I felt fine.

Cousin Roger showed up after lunch with some sandpaper replacements.  He will probably be borrowing them back again when he uses up the ones he bought for himself.


The Husband went to pick up the new tiller yesterday afternoon.  I'm anxious to see it in action.  

Speaking of tillers, the small engine repair guy called Thursday afternoon and said that the little red tiller could not be fixed.  He said that the plastic fuel lines were the root of the problem, that "plastic and gas don't mix."  Evidently (according to him), the gas dissolves the plastic, and the residue gets in the engine and gums up the works.  I found this a little puzzling.  The tiller is practically new; I bet it hasn't been used a total of 30 minutes.  I watched some YouTube videos on the subject, and I'm convinced that the tiller can be fixed with new fuel lines (and maybe a new fuel filter).  I am going to order some parts to see if I can fix the thing, myself.  



Thursday, March 18, 2021

Vaccinated - March 18, 2021

 

Well, I got my covid shot last night.  Did not cry.  Got my chocolate milkshake (small, from Sonic, with whipped cream).  Haven't felt badly today.  

Yesterday's storm was followed by a nasty cold wind.  I brought in the plants and the seed-starting trays that I'd taken outside two days ago.  I hope this cold snap doesn't last long.  

Yesterday I decided to try out my sublimation printing stuff.  The sublimation ink was already in the printer.  All I needed to do was introduce the printer to the computer.  

This took over three hours.  The printer found the wi-fi, but the computer couldn't find the printer.  When I first set up this computer, I chose the highest security for every feature I could find - camera, microphone, etc.  Most likely, I've told this computer that it cannot communicate with anything, except it does know about the other wireless printer in the sewing room.  Maybe those two printers are having a silent argument about who gets the job.  I don't know.  I temporarily got around the problem by hooking up the printer and the computer with a USB cable.

The little project I wanted to do was a t-shirt for Granddaughter #1.  I had a light gray polyester baseball shirt in her size.  She is in the high school band, so I used the band logo, plus her name (craftily combined  with the band logo), plus a flute.  The whole thing came out a little too faint, and the flute, being silver, all but disappears against the light gray shirt.  I need to figure out why the transfer was too faint - was it the print setting, the ink quality, the paper quality, or the wrong time/temperature of the heat press.  Can you tell I don't know what I'm doing?  

But The Granddaughter liked the shirt, despite its failings.  It is soft and comfy.



Wednesday, March 17, 2021

Stormy Day - March 17, 2021

 

Happy St. Patrick's Day to you.  

I got out of bed at 6 a.m. and went straight to the sewing room to work on the super-hero quilt.  One final burst of energy last night enabled me to measure and cut the border fabric before I went to bed.  This morning I sewed them on, and the top was ready for quilting.  I dropped it off at the quilt store on my way to work.

It was raining pretty hard when I got to the office.  The Boss was already there.  She said, "It's supposed to storm, and we're not staying here today."  We shot the bull for a few minutes and headed home.  Thank goodness for the new windshield wiper blades we installed yesterday, for the rain was coming down in buckets when I left the office.  

And now I'm home, and without a project in progress I'm a little stir-crazy.  

I have at least one more granddaughter quilt to make, for the Nugget, age 6.  (I gave the newest granddaughter a baby quilt a couple of weeks ago, so if I get struck by lightning, or something, before I get around to making her a big girl quilt, she technically already has a "grandmother quilt.")  

Several years ago, Santa Claus (or maybe the Birthday Fairy) brought me a little hand-crank machine that cuts out fabric shapes.  Along with the machine, he/she/it brought me several dies - squares, circles, hexagons, and hearts.  One day when the Nugget was about 4, I got out the machine and let her cut shapes from fabric in the scrap box.  Now and then, she still wants to get out the machine and cut shapes.  After she leaves, I gather up her shapes and save them in a bag.  When I get around to making her quilt, I'm going to use those shapes in it, somehow.

Not day, though.

Today, I think I'll play with the heat-press machine.

Tonight, I get vaccinated.